Bulletin Samara State Agricultural AcademyBulletin Samara State Agricultural Academy1997-32252782-4225Samara State Agrarian University50910Research ArticleSUBSTANTIATION OF NEEDLE SHAPE OF TRACTION-DRIVEN TILLAGE TOOLSSavelyevYu. A.Doctor of Technical Sciences, Professor of the Department «Agricultural Machines and Mechanization of Animal Husbandry»juri.savelev@mail.ruPetrovA. M.Candidate of Technical Sciences, Professor, Head of the Department of «Agricultural Machines and Mechanization of Animal Husbandry»Petrov_AM@ssaa.ruIshkinP. A.Candidate of Technical Sciences, Associate Professor of the Department «Electrification and Automation of Agrarian and Industrial complex»ishkin_pa@mail.ruPetrovM. A.Graduate Student of the Department «Agricultural Machines and Mechanization of Animal Husbandry»petrovma_89@mail.ruFSBEI HE Samara State Agrarian University1512201944202823112020Copyright © 2019, Savelyev Y.A., Petrov A.M., Ishkin P.A., Petrov M.A.2019Energy efficiency increase during soil cultivation by substantiating the shape of needles of rotary working parts of traction-driven tillage tools is the aim of the research. Tillage energy efficiency increase is one of the important tasks in improving the profitability and sustainability of agricultural production. It is proposed to increase cultivation energy efficiency due to the use of traction-drive tilling implement with active working parts, not creating high traction resistance and not requiring a large towing weight of aggregated tractor. The possibility of increasing the efficiency of the unit by reducing slipping of the tractor wheels and loss on rolling of the unit has been determined, which is achieved by transferring part of the power using the PTO of tractor to the drive working parts of tilling implement, which compensate traction resistance of the implement and create pushing force, reducing the resistance to rolling. The influence of the needle shape of the driving working parts on the direction of the resultant vector of resistance to soil deformation is investigated. The most advantageous shape of the needle is such one that provides minimal resistance to the penetration of the needle into the soil, and the resultant vector of resistance to soil deformation by it has a minimum value of the vertical component, i.e. total soil resistance is aimed at creating a pushing force. For this result the shape of the needle should provide a deepening of its entire working part through one point of the needle contact with the surface of the field. A theoretical dependence has been obtained that allows determining the optimal radius of curvature of the working part of the needle, depending on the disk diameter and the depth of loosening of the soil.soiltooldiscshapetillageefficiencyпочваорудиедискформаобработкаэффективность[Чаткин, М. Н. Кинематика и динамика ротационных почвообрабатывающих рабочих органов с винтовыми элементами : монография / М. Н. Чаткин. - Саранск : Изд-во Мордовского университета, 2008. - 315 с.][Савельев, Ю. А. Снижение потерь почвенной влаги на испарение / Ю. А. Савельев, О. Н. Кухарев, Н. П. Ларюшин [и др.] // Сельскохозяйственные машины и технологии. - 2018. - Т. 12, № 1. - С. 42-47.][Савельев, Ю. А. Теоретическое исследование водного баланса почвы и процесса испарения почвенной влаги / Ю. А. Савельев, Ю. М. Добрынин, П. А. Ишкин // Сельскохозяйственные машины и технологии. - 2017. - № 1. - С. 23-28.][Мусин, Р. М. Повышение эффективности культиваторных агрегатов с движителями-рыхлителями : монография / Р. М. Мусин, Р. Р. Мингалимов. - Самара, 2012. - 156 с.][Мингалимов, Р. Р. Исследования процесса образования и использования дополнительной движущей силы машинно-тракторного агрегата в результате применения движителей-рыхлителей / Р. Р. Мингалимов, Р. М. Мусин // Вестник Ульяновской государственной сельскохозяйственной академии. - 2015. - № 1 (29). - С. 126-132.][Пат. 2538810 Российская Федерация, МПК А 01 В 33/02. Орудие для поверхностной обработки почвы / Ишкин П. А., Савельев Ю. А., Петров А. М., Петров М. А. ; заявитель и патентообладатель ФГБОУ ВПО Самарская ГСХА. - № 2013146320/13 ; заявл. 16.10.2013 ; опубл. 10.01.2015, Бюл. № 1. - 7 с.][Савельев, Ю. А. Орудие для ранневесенней обработки почвы / Ю. А. Савельев, А. М. Петров, П. А. Ишкин, М. А. Петров // Сельский механизатор. - 2014. - № 10. - С. 6.][Петров, М. А. Повышение эффективности тягово-приводного почвообрабатывающего агрегата / М. А. Петров, Ю. А. Савельев, П. А. Ишкин // Вестник Ульяновской ГСХА. - 2018. - №3 (43). - С.19-24.][Корн, Г. Определения, теоремы, формулы : справочник по математике для научных работников и инженеров / Г. Корн. - М. : Книга по Требованию, 2014. - 832 с.]