THEORETICAL SUBSTANTIATION OF CONSTRUCTIVE AND REGIME PARAMETERS OF MECHANICAL CELLULAR-DISK SOWING DEVICE FOR SOWING AMARANTH PANICULATE


Cite item

Full Text

Abstract

The purpose of the study is improving the uniformity of sowing seeds of amaranth paniculate cellular-disk sowing device. One of the conditions allowing to achieve high planned yield of amaranth is its accurate seeding with specified messagenum interval. Uniform distribution of seeds and plants is necessary due to the high requirements to the area of nutrition. Analysis of the existing agropolicy and designs of modern metering devices for fine-seed crops shows that they do not allow to implement fully agroclavine accuracy of seed distribution in the row when planting amaranth with a variation megamanny intervals (10-15%) and low seeding rate (0.3-0.5 kg/ha), due to the very small sizes of seeds and characteristics of their physical and mechanical properties. In this regard, was developed a constructive-technological scheme of the cellular-disk sowing device, allowing to carry out the sowing amaranth seeds with low seeding rate and high longitudinal uniformity of distribution of seeds in the row. Novelty design cellular-disk sowing device is confirmed by the patents of the Russian Federation for inventions and utility model №61981, №2347349 respectively. The theoretical substantiation of the basic constructive and regime parameters of mechanical cellular-disk sowing device for sowing amaranth, in particular, the analytically determined: unit cell parameters of a seed disc and the velocity of the seed relative to the wire mesh of a seed disc. As a result of theoretical research has been substantiated geometric cell parameters: maximum diameter of the cell Dmax = 1.42 mm, the maximum depth of a cell Nmax = 1.62 mm, and the conditions of collapse of amaranth seeds in a cell, seed disc, namely the critical speed of the seed cattle = to 0.074 m/s and critical frequency of rotation of a seed disc min-1, which will be retraction of the amaranth seeds in a cell of a seed disc.

About the authors

Ol´ga Aleksandrovna Artamonova

Samara State Agricultural Academy

Email: art.olja @mail.ru
ст. преподаватель; кафедра «Механика и инженерная графика» The Russian Federation, Samara

Dmitriy Nikolaevich Kotov

Samara State Agricultural Academy

Email: kotov_dn@ssaa.ru
доцент; кандидат технических наук; доцент; кафедра «Механика и инженерная графика» The Russian Federation, Samara

Evgenij Ivanovich Artamonov

Samara State Agricultural Academy

Email: artamonov.evgenij.ivanovich@mail.ru
доцент; кандидат технических наук; доцент; кафедра «Технический сервис» The Russian Federation, Samara

References

  1. Крючин, Н. П. Разработка пневматического высевающего аппарата сеялки для посева амаранта малыми нормами / Н. П. Крючин, Н. В. Бурлака // Известия Самарской ГСХА. – 2015. – №3. – С. 38-41.
  2. Казарин, В. Ф. Амарант – высокопластичная культура // Агро-Информ. – 2012. – №7. – С. 18-20.
  3. Казарина, А. В. Особенности агротехнологии возделывания амаранта в Самарском Заволжье // Известия Самарской ГСХА. – 2015. – №4. – С. 7-11.
  4. Бурлака, Н. В. Анализ высевающих аппаратов для посева мелкосемянных культур и их классификация // Современные технологии, средства механизации и техническое обслуживание АПК : сб. науч. тр. Поволжской межвузовской конф. – Самара, 2011. – С. 30-31.
  5. Глуховцев, В. В. Практикум по основам научных исследований в агрономии / В. В. Глуховцев, В. Г. Кириченко, С. Н. Зудилин. – М. : Колос, 2006. – 248 с.
  6. Пат. 61981 РФ, МПК А01С 7/04. Высевающее устройство / Артамонов Е. И. – № 2006139918/22 ; заявл. 10.11.06 ; опубл. 27.03.07, Бюл. №9. – 2 с.
  7. Пат. 2347349 РФ, МПК А01С 7/04. Высевающее устройство / Артамонов Е. И., Гниломедов В. П. – № 2006139884/12 ; заявл. 10.11.06 ; опубл. 27.02.09, Бюл. №6. – 4 с.
  8. Кухарев, О. Н. Теоретические основы ориентации // Нива Поволжья. – 2007. – №2. – С. 27-31.
  9. Артамонов, Е. И. Повышение качества посева семян амаранта метельчатого совершенствованием технических средств и технологического процесса : дис. … кан. техн. наук / Артамонов Евгений Иванович. – Пенза, 2013. – 178 с.

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2016 Artamonova O.A., Kotov D.N., Artamonov E.I.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies